# Making audio loops

Audio loops are a type of music that plays a few bars on repeat over and over. They can be created by taking a sample out of pre-existing content and looping it seamlessly. 

## 1. Enable playback looping

![](/files/dpqSttelnxKLPPn2c8lC)

To enable playback looping, simply click onto the **loop button** (1). When you do this, you'll note the blue looping region appear in the timeline (2). You can move the region and it's in and out point individually by dragging it. 

{% hint style="info" %}
**Tip:** You can always create a new region by dragging anywhere outside the existing region within the timeline.
{% endhint %}

## 2. Finding the looping region

![](/files/SlV8hwhG0YNZioi9iANk)

When making a loop out of music, you often will be able to see repetitions in the waveform as your source material will probably contain some loop already (for example a drummer playing the same beat throughout the song). You can use these to roughly find good looping regions and position your looping region above it.

{% hint style="info" %}
**Notes:** 

* If you're having trouble finding a good region with a stereo track, you may want to convert it to mono first: **Tracks > Mix > Mix Stereo to Mono**
* When positioning your loop region, try to aim *just before* the peaks. Doing that may allow you to skip finetuning altogether.
* You can adjust the looping region even when playback is on.
  {% endhint %}

### Fine-tuning the loop and removing clicks

To make the loop seamless, you may need to zoom in some more, using `Ctrl+Scroll` (`Cmd+Scroll`) or the ![](/files/M7ixy9Gk8eOBWolk1ORt) magnifying glass. 

{% hint style="success" %}
Best practice: Set your looping points at a zero crossing, where the waveform (blue line) crosses 0 (black line): 

![](/files/2ZcJGSKZeXcg7013769B)
{% endhint %}

## 3. Turn your loop into a clip

Once your loop sounds right, you can select it's length in the waveform. A yellow line will appear when your cursor is lined up with the loop region properly. Once you have made the selection, you now can simply **right-click > Split Clip** (`Ctrl+I, Cmd+I`). 

Once you have the clip, you can copy-paste it anywhere in your project.

{% hint style="info" %}
**Tip:** If you want to use the clip on repeat, use **Effect > Repeat.** 
{% endhint %}

## See also:

{% content-ref url="/pages/-Mi6e-nj9xAL-euaPapZ" %}
[Saving and exporting projects](/~/revisions/jRaBJ1Uqtn08XKmnZnwE/basics/saving-and-exporting-projects.md)
{% endcontent-ref %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://support.audacityteam.org/~/revisions/jRaBJ1Uqtn08XKmnZnwE/music/making-audio-loops.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.